CBT 1000E The CBT 1000E cabinet contains six low frequency drivers and a crossover network purposely designed for use in the CBT 1000 + 1000E system, in a tough fiberglassreinforced ABS enclosure. The 1500W power handling and high sensitivity delivers powerful low frequency output. The drivers have neodymium magnet motors with 50 mm (2 in) diameter voice coils. The magnet system provides maximum flux in a compact package. The magnetic structure is magnetically shielded and the copper pole tips reduce flux modulation and minimize distortion. The 16 mm (0.62 mm) long coil provides higher linear drive and high power handling in a compact driver. The drivers feature damped blended surrounds and coated sealed paper cones found in high performance large format drivers. Drivers feature coated diaphragm materials to provide moisture, UV and salt resistance for outdoor capability. The thick heavy-duty aluminum grille allows for rust-free installation outdoors.
Key Features:
- CBT 1000E:
- Components: Six (6) 165 mm (6.5 in) high-excursion LF drivers
- 1500 Watt RMS power handling
- Built-in purpose-designed crossover network for combining with CBT 1000
- Coupler plate included
- Doubles power handling and extends pattern control
CBT 1000 + 1000E ARRAY SYSTEM:
- Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and twelve (12) 165 mm (6.5 in) high-excursion LF drivers
- Very high sound levels up to 131 dB (137 dB peaks) depending on the settings
- 3000 Watt RMS power handling
- Extended pattern control (to 300 Hz for +/- 20 degree control, to 200 Hz for substantial off-axis cancellation)
- Extended bass response to 38 Hz
- Patent-pending Constant Beamwidth Technology™ provides constant directivity and reduces out-of-coverage lobing
- Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing
- Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
- 2-piece swivel (pan)/tilt wall bracket and coupler plate included (rear insert-point pattern fits standard third-party brackets)
|
CBT 1000 and 1000E FAQ 160802.pdf |
|
|
CBT1K-Bracket-Manual-171001-Rev-C.pdf |
|
|
JBL_CBT1000E_SpecSheet.pdf |
|
|
JBL_MTC_CBT_FlushMount_Bracket_Guide_012017.pdf |
